• Other features can also temporarily change an extension’s TRS level, similar to Extension Dial Lock. If an
extension is locked, the TRS level determined by the following features takes priority. The numbers below
(1 through 3) indicate the priority of each feature, with 1 having the highest priority, and 3 having the lowest.
1. Dial Tone Transfer (® 4.1.5 Dial Tone Transfer)
2. TRS Override by System Speed Dialing (® 17.1.6 TRS (Toll Restriction))
3. Verification Code Entry/Walking COS (® 19.1.1 Verification Code Entry, ® 20.1.1 Walking COS)
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features
→ Extension Dial Lock Set / Cancel
→ Remote Extension Dial Lock Off
→ Remote Extension Dial Lock On
PT Programming Manual References
[510] TRS Level for Extension Dial Lock
Feature Manual References
3.1.21 COS (Class of Service)
Operating Manual References
1.3.24 Extension Dial Lock
3.2.2 Manager Programming
5.1.5 Extension Feature Clear
Description
Extension users can clear the following features set on their own telephone at once:
Features After Setting
Absent Message Off
BGM Off
FWD
*1
/DND
*1
Off
Call Pickup Deny Allow
Call Waiting
*1
Enable (Call Waiting tone)
Data Line Security Off
Executive Busy Override Deny Allow
Log-in/Log-out Log-in
Message Waiting All messages left by other extensions will be
cleared.
Paging Deny Allow
Document Version 2009-12 Feature Manual 93
5.1.5 Extension Feature Clear
To Next Page
Loading...
