2.6 Connecting Doorphones and Door Openers
Installation Manual 53
Connecting Door Openers
1. Use a flathead screwdriver to press and hold open the button below the terminal, and insert the
wire coming from the door opener into the terminal.
2. Wrap the strap around all of the cords. (o 2.2.4 Securing the Cables)
Notes
• We recommend using UL1015 wire or an equivalent for wiring.
• The wire should be between 0.45 mm and 1.1 mm in diameter excluding the coating.
Door opener 2
Door opener 1
To the door openers
To Next Page
Loading...
