2.10 Starting the Advanced Hybrid System
Installation Manual 61
b. PT programming. Refer to "3.3 PT Programming" of the Feature Guide. Users in countries
such as Italy and the Czech Republic are required to set the country code prior to all other
settings.
CAUTION
• The PBX is powered as long as the AC cord is plugged into an AC outlet, even if the Power
Switch is set to the "OFF" position.
• The power supply cord is used as the main disconnect device. Ensure that the AC outlet is
located/installed near the equipment and is easily accessible.
Notes
• If the outside (CO) lines you use are not connected to the PBX, outside (CO) line type cannot
be automatically detected.
• Use only the AC cord included with the PBX.
• If the PBX will not be used for an extended period of time, set the Power Switch to the "OFF"
position and disconnect the AC cord from the AC outlet to conserve power.
To Next Page
Loading...
