Panasonic KX-TG4221N

26
KX-TG4221N/KX-TG4222N/KX-TG4223N/KX-TG313SK/KX-TG4224N/KX-TG4225N/KX-TGA421N
8 Test Mode
8.1. Engineering Mode
8.1.1. Base Unit
1). Press .
2). Select "Initial setting" using or
then press or
{>}.
H/S key operation
H/S LCD
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
{^} {V}
3). Enter "7", "2", "6", "2", "7", "6", "6", "4".
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
5). Enter "
ە ", " ە ", " ە ", " ە " (Address). (*1)
7). Press , a long confirmation beep
will be heard.
8).
Press to return to standby mode.
After that, turn the base unit power off and then power on.
6). Enter "
㸨 ", " 㸨 " (New Data). (*1)
4). Select "Write EEP" using or
then press or
{>}.
{^} {V}
M
M
M
Note: * To enter "Set dial mode ", press M or {>} at " Set tel line".
It is necessary to turn on the power of base unit.
{OFF}
Default Data
Caller list
V^
Initial setting
V^
Set tel line
V^
Set dial mode
V^
Service mode
Read EEP
Write EEP
^
Set Addr.:
New Data
Set Addr.:
*
Select "Set tel line" using or
then press or
{>}.
{^} {V}
M
Naviga
(Volume) key
tor key/
?
{CLEAR}
Dial keypad
{MENU} {OK}
{MUTE} {PAUSE}
{OFF}
{FLASH} {CALL WAIT}