Useful Information
104 For assistance, please visit http://www.panasonic.com/phonehelp
Programmable settings
Making/answering calls, paging
Problem Cause and solution
I cannot program function
items, such as the dialing
mode.
L Programming is not possible while the base handset is
off the cradle or the {SP-PHONE} indicator lights.
L Programming is not possible while in talk or intercom
mode, or while listening to the messages.
L Do not pause for over 60 seconds while programming.
L Make sure that the cordless handset is in standby
mode.
While programming, the
unit/cordless handset
starts to ring.
L A call is being received. Answer the call and re-start
programming from the beginning after hanging up.
I can’t access the
cordless handset function
menu.
L Access is not possible during a call, or while accessing
a mailbox, the Caller List, or the Phonebook.
Problem Cause and solution
Static is heard, sound
cuts in/out. Interference
from other electrical units.
L Move the cordless handset(s) and the base unit away
from other electrical appliances (page 9).
L Move closer to the base unit.
L Raise the base unit antenna.
L If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The unit/cordless
handset does not ring.
L The ringer volume is set to OFF. Select HIGH,
MEDIUM, or LOW (page 79).
L If four cordless handsets are in use, the unit may not
ring. The cordless handset users will hear incoming call
tone.
L The base unit/cordless handset is removed from the
ring group. Add to the ring group (page 81).
L All lines have been set-up to be answered by the
automated attendant (page 66).
I cannot make a call. L The dialing mode may be set incorrectly. Set the dial
mode (page 25) to match the type of telephone service
you have (tone or pulse).
L The dialed number is restricted (page 84).
To Next Page
Loading...
