Panasonic KX-TG4500B - Editing Phonebook Items

Phonebook
For assistance, please visit http://www.panasonic.com/phonehelp 45
Searching for a name by initial from the
base unit
1 Press {f} or {g} to enter the
Phonebook.
L The number of items held are
displayed.
2 Press {<} to display the first
Phonebook item.
3 Press the dialing key ({0} to {9}) which
corresponds to the first letter you are
searching for (see the character table,
page 44).
Example: To find “SARAH”, press {7}
repeatedly until the first item under “S”
is displayed.
4 Press {<} until the name is displayed.
5 Lift the base unit handset or press
{SP-PHONE} or an available line key.
L The number is dialed automatically.
Scrolling through the Phonebook from
the cordless handset
1 While the cordless handset is in
standby mode, press to enter
the Phonebook.
L The number of items held is displayed.
2 Press {V} or {^} repeatedly to display
the desired item.
3 Press {C} or {s}.
L The number is dialed automatically.
L You can press a line key instead of
pressing {C} or
{s}.
Searching for a name by initial from a
cordless handset
1 While the cordless handset is in
standby mode, press to enter
the Phonebook.
L The number of items held is displayed.
2 Press .
3 Press the dialing key ({0} to {9}) which
corresponds to the first letter you are
searching for (see the character table,
page 44).
Example: To find “SARAH”, press {7}
repeatedly until the first item under “S”
is displayed.
4 Press {V} until the name is displayed.
5 Press {C} or {s}.
L The number is dialed automatically.
L You can press a line key instead of
pressing {C} or
{s}.
Editing Phonebook items
Using the base unit
1 Display the desired item, as described
under “Finding and calling a Phonebook
item” on page 44.
2 Press {EDIT}.
3 Edit the name, if necessary. See the
character table on page 44 for
character entry.
L Pressing {CLEAR} erases the
character to the left of the cursor. To
erase all characters, press and hold
{CLEAR}.
4 Press {ENTER}.
5 Edit the phone number, if necessary.
L Pressing {CLEAR} erases the digit to
the left of the cursor. To erase all digits,
press and hold {CLEAR}.
6 Press {ENTER}.
L Confirmation tone is heard.
7 Press {EXIT}.
Phb
Phb
Search
Base Unit
Handset