Panasonic KX-TG4500B - Page 26

Preparation
26 For assistance, please visit http://www.panasonic.com/phonehelp
Registering
You can register handsets in two ways,
both are described below. The latter way
uses direct commands. For a complete list
of direct commands refer to pages 92
through 94.
Method 1:
1 From the base unit, press {MENU}.
2 Scroll to “Initial setting” by
pressing {<} or {>}, then press
{ENTER}.
3 Scroll to “Registration” by pressing
{<} or {>}, then press {ENTER}.
4 Scroll to “HS registration” by
pressing {<} or {>}, then press
{ENTER}.
L The handset registration screen is
displayed.
5 Press {ENTER}.
6 From the cordless handset, press
.
L The cordless handset attempts to
register to the base unit.
L After linking to the base unit, the
completion screen is displayed and
confirmation tone is heard on both the
base unit and registered cordless
handset.
L Once successfully linked, “
Handset
registered
” is displayed on both the
base unit and the cordless handset.
Repeat to register additional cordless
handsets.
L To rename the cordless handset to
something memorable, refer to
page 82.
Method 2:
1 From the base unit, press {MENU},
followed by {#}, {1}, {2}, {3}.
2 Press {ENTER}.
3 From the handset, press {MENU},
followed by {#}, {1}, {2}, {3}.
4 Press .
L The cordless handset attempts to
register to the base unit.
L After linking to the base unit, the
completion screen is displayed and
confirmation tone is heard on both the
base unit and registered cordless
handset.
L Once successfully linked, “
Handset
registered
” is displayed on both the
base unit and the cordless handset.
Repeat to register additional cordless
handsets.
L To rename the cordless handset to
something memorable, refer to
page 82.
Handset and Base Unit
Press MENU, #, 123 on
press ENTER on base.
the handset, then
OK
Registration.
Press MENU, #,
OK
123 on the base,
then press
2
Press MENU, #, 123 on
press ENTER on base.
the handset, then
Registration.
Press MENU, #,
OK
123 on the base,
then press
2
Back
OK