215
such as Last number redial or Call reject.
Problem: An error tone is heard when I try to
program the Bluetooth feature.
Cause/solution:
• The Bluetooth feature cannot be accessed
immediately after connecting the AC adaptor to
the base unit. Wait a few seconds and try again.
• The headset has not connected to the base unit
yet, even though you performed the connecting
procedure setting. Wait a few seconds and try
again.
Answering system
Problem: The unit does not record new messages.
Cause/solution:
• The answering system is turned off. Turn it on
(page 158).
• The answering system does not answer or record
calls from cellular lines.
• The message memory is full. Erase unnecessary