Panasonic KX-TGE240B

28
KX-TGE240/242/243/244/245/260/262/263/264/270/272/273/274/275/TG454/TG465/TGEA20/TGA20
Frequently Used Items (Base Unit)
ex.)
Note:
(*1) When you enter the address or New Data, please refer to the table below.
Items Address Default Data New Data Remarks
C-ID (FSK) sensitivity 06 0B 00 01
(6 dB up)
0 2
(12 dB up)
When hex changes from “00” to “01” or “02”,
gain increases by 6 dB or 12 dB. (for KX-
TGE240)
C-ID (FSK) sensitivity 06 0E 00 01
(6 dB up)
02
(12 dB up)
When hex changes from “00” to “01” or “02”,
gain increases by 6 dB or 12 dB. (for KX-
TGE260) (for KX-TGE270)
Frequency 00 07 / 00 08 70/02 - - Use these items in a READ-ONLY mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID 00 02 ~ 00 06 Given value - -
Desired Number (hex) Input Keys Desired Number (hex) Input Keys
0 0 A [Flash] + 0
1 1 B [Flash] + 1
. . C [Flash] + 2
. . D [Flash] + 3
. . E [Flash] + 4
9 9 F [Flash] + 5
7). Press {OK} , a long confirmation beep
will be heard.
8).
Press {OFF} to return to standby mode.
After that, turn the base unit power off and then power on.
Note: (*) “Set tel line” is not displayed in Cell line only mode.
To return to normal mode, execute the following procedure:
New Data
_ _ _ _ _ _
Set Addr.:
Set Addr.:
CLEAR
OK
BACK
1 {MENU} i {#}{1}{5}{7}
2 {V}/{^}: Select "off "i {SELECT}
3 {OFF}