Panasonic KX-TS4100 - Date and time; Dialing mode

Preparation
24
For assistance, please visit http://www.panasonic.com/phonehelp
Date and time
Set the correct date and time.
I
mpor
t
an
t
:
L Make sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “Phone Setup”, then press
{MENU/SET}.
3 Select “Date & Time”, then press
{MENU/SET}.
4 Enter the current year by selecting 2
digits, then press {MENU/SET}.
Example: 2006
{0}{6}
L You can set the year 2000 to 2099.
5 Enter the current month and day by
selecting 2 digits for each, then press
{MENU/SET}.
Example: August 15
{0}{8} {1}{5}
6 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each, then press
{MENU/SET}.
Example: 9:30
{0}{9} {3}{0}
7 Select “A” (AM) or “P” (PM), then
press {MENU/SET}.
8 Press and hold {MENU/SET} to
return to standby mode.
N
o
t
e:
L To return to the previous menu, press
{<}.
L If you make a mistake when entering
the date and time, press {<} or {>}
to move the cursor, then make the
correction.
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
I
mpor
t
an
t
:
L Make sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “Phone Setup”, then press
{MENU/SET}.
3 Select “Tone/Pulse”, then press
{MENU/SET}.
4 Select the desired setting, then press
{MENU/SET}.
5 Press and hold {MENU/SET} to
return to standby mode.
N
o
t
e:
L To return to the previous menu, press
{<}.
➔ Date & Time
Auto Mute
Tone/Pulse
[V/^]:Scroll
➔ Tone/Pulse
Flash Time
Hold Reminder
[V/^]:Scroll
Tone/Pulse
=Tone
[SET]:Save
[V/^]:Change
KXT4100OI.bookPage24Friday,September1,20068:54AM