Panasonic KX-TS4100 - Programming the advanced setup features; Line group; Reset all

Programming
For assistance, please visit http://www.panasonic.com/phonehelp 43
Programming the
advanced setup
features
Line group
You can choose to leave LINE4
unconnected at particular extensions or
to connect private lines (constructing a
line group) at particular extensions.
To set up the line group, see “Setting up
the line group” on page 20.
I
mpor
t
an
t
:
L Make sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “Advanced Setup”, then
press {MENU/SET}.
3 Select “Line Group”, then press
{MENU/SET}.
4 Select the desired setting, then press
{MENU/SET}.
5 Press and hold {MENU/SET} to
return to standby mode.
N
o
t
e:
L To return to the previous menu, press
{<}.
L Transferring a call to a different line
group through line 4 is not allowed.
Reset all
Return all features to default settings,
and all numbers set to speed dial are
erased. You cannot undo the “Reset All”
command.
I
mpor
t
an
t
:
L Make sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “Advanced Setup”, then
press {MENU/SET}.
3 Select “Reset All”, then press
{MENU/SET}.
4 Select “Yes?”, then press
{MENU/SET}.
L To cancel, select “No?”, then press
{MENU/SET}.
5 Press and hold {MENU/SET} to
return to standby mode.
N
o
t
e:
L To return to the previous menu, press
{<}.
➔ Line Group
Reset All
Ringer On/Off
[V/^]:Scroll
Line Group
=Line 04
[SET]:Save
[V/^]:Change
➔ Reset All
Ringer On/Off
Ringer Type
[V/^]:Scroll
Reset All
Yes?
[SET]:Reset
[V/^]:Change
KXT4100OI.bookPage43Friday,September1,20068:54AM