111
4. Focus, Brightness (Exposure) and Colour tone Settings
Adjusting the White Balance
Applicable modes:
White Balance adjusts the colour of white according to the light source to make the overall
colour hue closer to what is seen by the eye.
1
Press [ ].
2
Rotate the rear dial or front dial to select the
White Balance.
• Setting can also be performed by rotating the control
dial.
¢ [AWB] is applied when you record motion picture or perform recording with the 6K/4K
Photo or Post Focus function.
[AWB]/
[AWBc]
Adjusting the White Balance automatically
• Under lighting such as incandescent lighting where reddish tones may
occur:
– With [AWB], reddish tones are maintained to reproduce the ambience of
the scene more accurately.
– With [AWBc], reddish tones are suppressed to reproduce the original
colours of the subject more accurately. The same tones as [AWB] may
be applied in a bright environment.
• [AWB] and [AWBc] apply the same tones under light sources where
reddish tones may not occur.
[V] When taking pictures outdoors under a clear sky
[Ð] When taking pictures outdoors under a cloudy sky
[î] When taking pictures outdoors in the shade
[Ñ] When taking pictures under incandescent lights
[]
¢
When taking pictures with the flash only
AWBc
WB
WBWBWBWBWBWBWB
AWB
To Next Page
Loading...
