63
2. Getting Started/Basic Operations
Register a function and its setting that operate when you set the function lever (P48) to
[MODE2].
1 Select the menu.
2 Press 3/4 to select the function you want to assign, and press [MENU/SET].
¢ Default function lever setting.
• To reset the function lever setting to the default, select [Restore to Default].
3 Press 3/4 to select [MODE 2 Setting], and press [MENU/SET].
4 Press 3/4 to select the function setting selected in
step
2, and press [MENU/SET].
• The screen shown here is an example, where [Self Timer]
has been assigned to register it in combination with the
[ ] setting.
• If you assign [Slot Change], a screen will be displayed, allowing you to switch the card slot for
playback.
• If you assign [6K/4K Photo Play], a screen will be displayed, allowing you to select the
pictures to be extracted from a 6K/4K burst file and saved.
Assigning a function to the function lever
> [Custom] > [Operation] > [Fn
Lever Setting] > [Function of Fn Lever]
– [AF Mode]
– [Quality]
– [Photo Style]
– [Long Shtr NR]
– [Stabilizer]
– [6K/4K PHOTO (Pre-Burst)]
– [Self Timer]
– [Silent Mode]
¢
– [Shutter Type]
– [Bracket]
– [Touch Screen]
– [Touch Pad AF]
– [Auto Review (Photo)]
– [Peaking]
– [Night Mode]
– [Front/Rear/Control Dial Lock]
–[Off]
– [Restore to Default]
• Assigning [Front/Rear/Control Dial Lock] will disable the front/rear/control dial operation of
screens such as the recording screen.
To Next Page
Loading...
