47
2. Getting Started/Basic Operations
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• These operating instructions expresses the up, down, left, and
right of the cursor button as 3/4/2/1.
[Exposure Comp.]
Assigns the Exposure Compensation to the front dial or rear
dial so that you can directly adjust it.
[] (Front Dial)/[ ] (Rear Dial)/[OFF]
[Dial Operation Switch
Setup]
Sets the items to be assigned temporarily to the front/rear dials
when you press the function button to which [Dial Operation
Switch] is assigned.
[] ([Front Dial Operation])/[ ] ([Rear Dial Operation])
• Items that can be set are as follows.
– [Photo Style]
– [Filter Effect]
– [Aspect Ratio]
– [AF Mode]
– [6K/4K PHOTO]
– [Highlight Shadow]
– [i.Dynamic]
– [i.Resolution]
– [Flash Mode]
– [Flash Adjust.]
– [Sensitivity]
– [White Balance]
• [Highlight Shadow] uses the two dials.
Cursor buttons/[MENU/SET] button
To Next Page
Loading...
