223
9. Using Menu Functions
[Economy]
[Sleep Mode]
The camera is automatically turned off if the camera has not been used for
the time selected on the setting.
[Sleep
Mode(Wi-Fi)]
The camera is automatically turned off if it is not connected to a Wi-Fi
network and has not been used for 15 minutes (approx.).
[Auto LVF/
Monitor Off]
The monitor/viewfinder is automatically turned off if the camera has not
been used for the time selected on the setting.
[Power Save LVF
Shooting]
If you display the monitor using the viewfinder/monitor automatic switching
function, the camera will turn off automatically after being left idle.
[Time]
Sets the amount of time before the camera turns off
automatically.
[10SEC]/[5SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]
• When not using [Power Save LVF Shooting], select [OFF].
[Display]
Sets whether to turn off the camera automatically only while the
[Monitor Info. Disp.] screen is displayed or while any screen is
displayed.
[Only Monitor Info.]:
Sets the camera to turn off automatically only when [Monitor
Info. Disp.] is displayed.
[All Live View]:
Sets the camera to turn off automatically when any screen is
displayed.
• To cancel [Sleep Mode], [Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting], perform either of
the following operations:
– Press the shutter button halfway.
– Turn off and on the camera.
• To turn the monitor/viewfinder on again, press any button.
• [Economy] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– When recording with [6K/4K Pre-Burst]
– When recording in [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when [Auto Shooting] is set)
– When using the HDMI output during recording
• When using the AC adaptor (optional), [Sleep Mode], [Sleep Mode(Wi-Fi)] and [Power Save
LVF Shooting] are disabled.
• When using the AC adaptor (optional), [Auto LVF/Monitor Off] is fixed to [5MIN.].
To Next Page
Loading...
Need help?
General
