191
9. Using Menu Functions
∫ Taking a picture with and without an image effect simultaneously ([Simultaneous
Record w/o Filter])
You can press the shutter button once and take two pictures simultaneously, one with an
image effect and the other one without it.
Settings: [ON]/[OFF]
Applicable modes:
Set this when you want to correct the colour reproduction of the recorded pictures on a
PC, printer etc.
> [Rec] > [Filter Settings] > [Simultaneous Record w/o Filter]
• A picture with an image effect will be taken first, followed by a picture without it.
• Only an image with an image effect is displayed for Auto Review.
Not available in these cases:
• In the following case, [Simultaneous Record w/o Filter] does not work:
– Recording still pictures while recording a motion picture (only when set to [ ] ([Video
Priority]))
– When recording 6K/4K photos
– When recording with the Post Focus function
– When recording in Burst Mode
– When [Quality] is set to [ ], [ ] or [ ]
– When recording with the Bracket function
– When using [Time Lapse Shot]
– When using [Stop Motion Animation]
[Color Space]
> [Rec] > [Color Space]
[sRGB]
Colour space is set to sRGB colour space.
This is widely used in computer related equipment.
[AdobeRGB]
Colour space is set to AdobeRGB colour space.
AdobeRGB is mainly used for business purposes such as professional
printing because it has a greater range of reproducible colours than sRGB.
• Set to [sRGB] if you are not very familiar with AdobeRGB.
• The setting is fixed to [sRGB] in the following cases.
– When recording motion pictures
– When recording 6K/4K photos
– When recording with the Post Focus function
MENU
MENU
To Next Page
Loading...
