10. Using the Wi-Fi/Bluetooth function
288
Connecting the camera and another device directly (direct connection)
[WPS Connection]
[WPS (Push-Button)]
1 On the camera, select [WPS (Push-Button)].
2 Set the device to WPS mode.
• You can wait longer for a connection by pressing [DISP.] on this
unit.
[WPS (PIN code)]
1 On the camera, select [WPS (PIN code)].
2 Enter the PIN code of the device into this camera.
[Manual Connection]
Enter the SSID and password into
the device. The SSID and
password are displayed on the
connection waiting screen of this
unit.
• If the destination is set to
[Smartphone], the password is not
displayed. Select the SSID to
establish a connection. (P256)
• Please also refer to the operating instructions of the device to be connected.
To Next Page
Loading...
