2. Getting Started/Basic Operations
60
Assigning Frequently-Used Functions to
Buttons/Lever (Function Buttons/Function
Lever)
You can assign various features, such as recording functions, to specific buttons and icons
as well as the function lever.
1 Select the menu.
2 Press 3/4 to select the function button you want to
assign a function to and then press [MENU/SET].
• To select a button from [Fn11] to [Fn19] in [Setting in REC
mode], press [DISP.] to switch the screen.
3 Press 3/4 to select the function you want to assign
and then press [MENU/SET].
• For details on the functions that can be assigned in
[Setting in REC mode], refer to P61.
• For details on the functions that can be assigned in [Setting in PLAY mode], refer to P62.
• To restore the default function button settings, select [Restore to Default].
• Some functions cannot be assigned depending on the function button.
Assigning functions to function buttons
> [Custom] > [Operation] > [Fn Button Set]>
[Setting in REC mode]/[Setting in PLAY mode]
• Touching [Fn] on the on-monitor recording information screen (P49) also allows you to display
the screen in step
2.
• If you press and hold a function button (any of [Fn1] to [Fn5] or [Fn11] to [Fn19]) for
2 seconds, the screen displayed in step
3 can be displayed.
In some cases, however, the screen cannot be displayed depending on the currently selected
mode or the currently displayed screen.
MENU
To Next Page
Loading...
