39
2. Getting Started/Basic Operations
7
When [The clock setting has been completed.] is displayed, press
[MENU/SET].
8
When [Please set the home area] is displayed, press [MENU/SET].
9
Press 2/1 to select the home area, and then
press [MENU/SET].
∫ Re-adjusting the clock
• The clock can be reset as shown in steps 5 and 6 on P38.
• The clock setting is maintained for 3 months using the built-in clock battery even
without the battery.
(Leave the charged battery in the unit for 24 hours to charge the built-in battery.)
> [Setup] > [Clock Set]
• To place the correct date on pictures, set the clock before recording.
Otherwise, the correct date will not be printed when you order a photo studio to print pictures
or you will not be able to stamp the correct date on pictures.
MENU
To Next Page
Loading...
