15
• Step 7. Set the model suffix at "INITIAL SETTINGS":
Press the "[ RIGHT ] of Cursor button".
The only set area is displayed. Press the "[ RIGHT ] of Cursor button" after confirmation.
(The unit is powered off automatically.)
Note:
It may cause the following error indication without cancellation of "STRICT MODE".
In this case, press [ DISPLAY ] button after disappearing error indication.
• Step 8. CONFIRMATION:
Confirm the display of "PLEASE SET THE CLOCK" in concerned language when the unit is turned on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
As for your reference, major default setting condition is as shown in the following table.
• Default setting (After "INITIAL SETTINGS")
MODEL VIDEO OUTPUT LANGUAGE DATE REMARKS
a) DC-TZ90 (Japan domestic model) NTSC Japanese Year/Month/Date
b) DC-TZ90EB PAL English Date/Month/Year
c) DC-TZ80EF PAL English Date/Month/Year
d) DC-TZ90EG PAL English Date/Month/Year
e) DC-TZ90EP PAL English Date/Month/Year
f) DC-TZ90GA PAL English Date/Month/Year
g) DC-TZ90GC PAL English Date/Month/Year
h) DC-TZ90GN PAL English Date/Month/Year
i) DC-TZ91EG PAL English Date/Month/Year
j) DC-TZ92EF PAL English Date/Month/Year
k) DC-TZ93EB PAL English Date/Month/Year
l) DC-ZS70P NTSC English Month/Date/Year
m) DC-ZS70PP NTSC English Month/Date/Year
n) DC-ZS70GH PAL English Date/Month/Year
o) DC-ZS70GK PAL Chinese (simplified) Year/Month/Date
p) DC-ZS70GT NTSC Chinese (traditional) Year/Month/Date
To Next Page
Loading...
Need help?
General
