14
[CASE 2. Other than "After replacing Main P.C.B. and/or Flash-ROM"]
• Step 5. The cancellation of "STRICT MODE":
Press [ DISPLAY ] button, then Strict in the upper right corner of the LCD display will disappear.
• Step 6. Chose the model suffix in "INITIAL SETTINGS": (Refer to "CAUTION")
[Caution: After replacing Main P.C.B. and/or Flash-ROM]
(Especially, other than "DC-TZ90EB/EF/EG/EP, TZ91, TZ92 and TZ93" models)
The model suffix can be chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can not be changed.
Therefore, select the area carefully.
Select the area with pressing "[ UP/DOWN ] of Cursor buttons".
To Next Page
Loading...
Need help?
General
