Panasonic Lumix DMC-FT10 User Manual

30 VQT2X62 VQT2X62 31
The Clock is not set when the camera is shipped.
Setting the Clock
Press ◄► to select the items (year, month, day, hour, minute,
display order or time display format), and press ▲▼ to set
Select the
setting
item
Select either [24HRS] or [AM/
PM] for the time display format.
Select the display order for the day, month, and year
([M/D/Y], [D/M/Y], or [Y/M/D]).
Change
the values
and
settings
• To cancel → Press .
• When set to [AM/PM], 0:00 midnight is AM 12:00, and 0:00 noon is PM 12:00.
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press .
• Turn on power again and check time display.
(Time and date can be displayed by pressing [DISPLAY] several times.)
To change time setting
Select [CLOCK SET] from [REC] or [SETUP] menu (→36), perform and .
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in the camera for 24 hours
beforehand.
■
To set local time at travel destination
[WORLD TIME] (→72)
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures at a digital photo centre or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
Press the Power button
The power is turned on.
If the language select screen is not displayed,
proceed to step
.
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
[PRECAUTIONS] is displayed.
Press ◄ to select [YES], and then
press [MENU/SET]
Be sure to check the information in
[PRECAUTIONS], to ensure that the
waterproof performance is maintained.
• When [NO] is selected, [PLEASE SET THE
CLOCK] is displayed. (When the power is
turned on by holding the Playback button,
the clock setting screen is not displayed.)
Press ◄► to check the
waterproof precautions, and at the
final screen (11/11), press [MENU/
SET]
The [PLEASE SET THE CLOCK] message
appears.
Press [MENU/SET]

Panasonic Lumix DMC-FT10 Specifications

General

Megapixel	14.1 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.33 \
Maximum image resolution	4320 x 3240 pixels
Digital zoom	4 x
Focal length range	6.3 - 25.2 mm
Interface	USB 2.0, AV out
Digital SLR	No
Camera shutter speed	8 - 1/1600 s
Compatible operating systems	-
Focal length (35mm film equivalent)	35 - 140 mm
Normal focusing range	0.5 - ∞ m
Auto Mode focusing range (wide)	0.1 - ∞ m
ISO sensitivity	80, 100, 200, 400, 800, 1600
Flash modes	auto, Red-eye reduction, Slow synchronization
Internal memory	40 MB
Compatible memory cards	SD, SDHC, SDXC
Motion JPEG frame rate	30 fps
Maximum video resolution	640 x 480 pixels
Display diagonal	2.7 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Scene modes	Beach, Candlelight, Close-up (macro), Night landscape, Night portrait, Portrait, Self-portrait, Snow, Sports, Sunset, Landscape (scenery)
Image editing	crop, resizing
Photo effects	Black&White, Neutral, Sepia, Vivid
White balance	Auto, Cloudy, Daylight, Shade
Camera playback	single image, slide show
Product color	Black
Battery capacity	695 mAh
Battery life (CIPA standard)	300 shots
Bundled software	PHOTOfunSTUDIO 5.0 Edition / QuickTime / Adobe Reader

Weight and Dimensions

Depth	63.5 mm
Width	100.3 mm
Height	21.6 mm
Weight	152 g