52 VQT2X62 VQT2X62 53
Changing recording information display
T
aking pictures with the self-timer
Recording Mode:
You can switch between various information shown on the LCD monitor, such as guide
lines and recording information.
■
Guide lines
• Reference for composition (e.g. balance) when recording.
●
During Playback Zoom, Motion Picture Playback, Slide Show: Display on/off
●
During menu display, Multi Playback or Calendar Playback: Display cannot be changed.
●
Guide lines are not displayed in [PHOTO FRAME] Scene Mode.
Press to change display
●
In Recording Mode
Recording information No display Guide lines
●
In Playback Mode
Picture information Picture information +
Recording information
No display
We recommend using a tripod. This is also effective for correcting jitter when pressing the
shutter button, by setting the self-timer to 2 seconds.
●
When set to [BURST], three pictures are taken. When set to the [FLASH BURST]
Scene Mode, five pictures are taken.
●
Focus will be automatically adjusted immediately before recording if shutter button is
pressed fully.
●
After self-timer lamp stops flashing, it may then be lit for AF Assist Lamp.
●
This function cannot be used in [HI-SPEED BURST] Scene Mode.
●
In [SELF PORTRAIT] Scene Mode, [10SEC.] is not available.
Display [SELFTIMER]
Select time duration
(Can also be
selected with ◄.)
The menu screen is displayed
for approx. 5 sec. Items you
select during this period are
automatically selected.
Take a picture
Press the shutter button fully to start recording
after the preset time.
• To cancel while in operation
→ Press [MENU/SET]
Self-timer indicator
(Flashes for set time
duration)
To Next Page
Loading...
