42 VQT2X62 VQT2X62 43
Please set the Clock before recording. (→30)
Sequence of Recording
Press the Power button
The power is turned on.
■
To turn the power on in Playback Mode
Hold the Playback button
Select the desired Recording
Mode
■
To use settings automatically selected by
the camera
Press the button.
■
To select the Recording Mode manually
Press the [MODE] button.
Press ▲▼ to select the Recording Mode,
and then press [MENU/SET].
Press the shutter button and take
pictures
Press halfway
(press lightly to
focus)
Press fully
(press the button all
the way to record)
• To record motion pictures (→69)
Play back the pictures you took
Press the Playback button.
Press ◄► to select a picture.
■
To return to the Recording Mode
Press the Playback button again.
• The camera returns to the previous
Recording Mode.
Press the Power button
The power is turned off.
Playback button
button
Power button
[MODE] button
[MENU/SET]
■
Recording Mode list
[INTELLIGENT AUTO] Mode Take pictures with automatic settings. (→44)
[NORMAL PICTURE] Mode Take pictures with your own settings. (→46)
[MY SCENE MODE]
Take pictures in commonly used Scene
Modes.
(→68)
[SCENE MODE] Take pictures according to scene. (→59)
[MOTION PICTURE] Mode Take motion pictures. (→69)
■
Holding the camera
Microphone
Flash
AF Assist Lamp
• If jitter becomes noticeable, use both hands, keep your
arms close to your body, and stand with your feet at
shoulder width.
• Do not touch the lens.
• Do not block the microphone when recording motion
picture.
• Do not block the flash or the AF Assist Lamp. Do not look
at it from close range.
• Try to hold the camera steady when you press the
shutter button.
To Next Page
Loading...
