74 VQT2X62 VQT2X62 75
For details about the setting procedure in the [REC] menu (→32)
Using the [REC] menu (Continued)
[SENSITIVITY]
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
■
Mode:
■
Settings: [ ] (Intelligent ISO) / [80] / [100] / [200] / [400] / [800] / [1600]
Setting guide
[SENSITIVITY] [80] [1600]
Location
(recommended)
Bright
(outdoors)
Dark
Shutter speed Slow Fast
Interference Low High
●
[ ] is automatically set in a range up to 1600 based on subject movement and
brightness.
●
Scope of flash recording (→55)
●
If interference becomes noticeable, we recommend reducing the setting, or selecting
[NATURAL] in the [COLOR MODE].
[WHITE BALANCE]
Adjust colouring to suit light source if colours otherwise appear unnatural.
■
Mode:
■
Settings: [
AWB] (automatic) / (outdoor, clear sky) / (outdoor, cloudy sky) /
(outdoor, shade) / (incandescent lighting) / (uses value set in
) / (set manually)
[AWB] operational range:
10000K
9000K
8000K
7000K
6000K
5000K
4000K
3000K
2000K
1000K
Cloudy sky (rain)
Shade
Incandescent lighting
Sunset/sunrise
Candlelight
Sunlight
White fluorescent lighting
Blue sky
●
Picture may appear red or blue if out of
range. This function may also not work
correctly even within range if there are many
light sources present.
●
We recommend setting to [AWB] or [ ]
when under fluorescent lighting.
K=Kelvin colour Temperature
■
Setting White Balance manually ( )
Select and press [MENU/SET].
Point the camera towards a white object (e.g. paper)
and press [MENU/SET].
Press [MENU/SET].
• White Balance is set to .
• The White Balance you set is retained even after
the power is turned off.
• White Balance setting may not be possible if the
subject is too bright or too dark. In such cases,
adjust the subject to an appropriate brightness, and
then set the White Balance again.
Only takes picture of white
objects within frame (step
)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
