EasyManua.ls Logo

Panasonic Lumix DMC-FT10 - [Tv Aspect];[Version Disp.]; [Format]; [Language];[Demo Mode]

Panasonic Lumix DMC-FT10
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 VQT2X62 VQT2X62 41
For details about the setting procedure in the [SETUP] menu. (32)
Using the [SETUP] menu (Continued)
Item Settings, Notes
[TV ASPECT]
Change the aspect ratio
when connected to a
TV, etc. (Playback Mode
only).
/
Operates when AV cable is connected.
[VERSION DISP.]
Check the version of the
camera firmware.
Current version is displayed.
[FORMAT]
Use when [BUILT-IN
MEMORY ERROR]
or [MEMORY CARD
ERROR] appears, or
when formatting the built-
in memory or card.
When a card/built-in
memory is formatted,
the data cannot be
restored. Check the
content of the card/
built-in memory
carefully before
formatting.
[YES]/[NO]
This requires a sufficiently charged battery (23) or AC
adaptor (optional). When formatting the built-in memory,
remove the cards.
(Only inserted card will be formatted if present; built-in
memory will be formatted if no card is inserted.)
Always format cards with this camera.
All protected pictures and other picture data will be
deleted. (93)
Do not turn off power or perform other operations during
formatting.
Formatting the built-in memory may take several
minutes.
Consult the dealer or your nearest Service Centre if
format cannot be successfully completed.
Item Settings, Notes
[LANGUAGE]
Change display
language.
Set the language displayed on the screen.
[DEMO MODE]
View demonstration of
functions.
[STABILIZER DEMO.]: (Only during recording)
Indicates the extent of jitter detected by the camera
(Estimate)
Large Small Large
Extent of jitter
Extent of jitter after stabilization
When the demo screen is displayed, press [MENU/SET]
to switch the Optical Image Stabilizer between on and
off.
Cannot be displayed in Playback Mode.
To stop Press [DISPLAY] button.
Recording and zoom cannot be performed during demo.
[AUTO DEMO]: View introductory Slide Show
[OFF]/[ON]
To close Press [MENU/SET]
If the camera is left switched on while connected to the
AC adaptor (optional) and with no card inserted, the
demo will automatically begin whenever no operations
are performed for approx. 2 minutes.
[AUTO DEMO] cannot be displayed on external devices
such as TVs.
For details about the setting procedure in the [SETUP] menu. (32)

Table of Contents

Other manuals for Panasonic Lumix DMC-FT10

Related product manuals