78 VQT2X62 VQT2X62 79
Using the [REC] menu
(Continued)
For details about the setting procedure in the [REC] menu (→32)
[COLOR MODE]
Set colour effects.
■
Mode:
■
Settings: [STANDARD] / [NATURAL] (soft) / [VIVID] (sharp) / [B/W] / [SEPIA] /
[COOL] (more blue) / [WARM] (more red)
●
If interference is noticeable in dark locations: Set to [NATURAL].
●
In ([INTELLIGENT AUTO] Mode), [STANDARD], [B/W], and [SEPIA] can only be set.
[STABILIZER]
Automatically detects and prevents jitter.
■
Mode:
■
Settings:
Settings Effect
[OFF] Pictures deliberately taken with no jitter correction
[AUTO]
The Optimum Image Stabilizer is performed automatically based on the
recording conditions
[MODE 1]
Constant correction
(Monitor image stable, composition easy to determine)
[MODE 2]
Correction when shutter button is pressed
(More effective than [MODE 1])
●
Setting fixed to [MODE 2] in [SELF PORTRAIT] and [OFF] in [STARRY SKY] Scene
Modes.
●
Cases where Optical Image Stabilizer may be ineffective:
Heavy jitter, high zoom ratio (also in the Digital Zoom range), fast-moving objects,
indoors or in dark locations (due to low shutter speed)
●
This is fixed at [MODE 1] during motion picture recording.
[AF ASSIST LAMP]
Illuminates lamp when dark to facilitate focus alignment.
■
Mode:
■
Settings: [OFF] : Lamp off (taking pictures of animals in dark, etc.)
[ON] : Lamp illuminated with halfway press of shutter
button (
and larger AF area displayed)
●
Cannot be set in Motion Picture Recording Mode. The setting in
other Recording Mode is applied.
Lamp: Effective distance: 1.5 m (4.92 feet)
(Do not cover or look at lamp from close range)
[RED-EYE REMOVAL]
Automatically detects red-eye and corrects still picture data when recording with flash
Red-Eye Reduction ( ).
■
Mode:
■
Settings: [OFF]/[ON]
●
Disabled when [AF MODE] is other than (Face Detection).
●
Depending on the circumstance, it may not be possible to correct the red-eye effect.
●
When [ON] is selected, is displayed in the flash icon. (→54)
[CLOCK SET]
Set the clock (→30). Same function as that in [SETUP] menu.
To Next Page
Loading...
