14 VQT2X62 VQT2X62 15
Camera care and the waterproof
performance
(Continued)
Remove adhered foreign objects with the supplied brush
: Brush (supplied)
Long brush Short brush
Use to remove
substances such as
fine or dry sand.
Use to remove large
foreign objects, and
substances such as
wet sand.
: Card/Battery door
: Terminal cover
●
Handling the brush
• Before using the brush, make sure that no foreign objects are adhered to it.
• After using the brush, clean it by removing any adhered foreign objects.
■
Example of foreign objects on the inner side of the card/battery door
: Rubber seal contact area
(around the card/battery
compartment)
: Rubber seal area
(around the card/battery
door)
■
Example of foreign objects on the inner side of the terminal cover
: Rubber seal contact area
(around the connection socket)
: Rubber seal area
(around the terminal cover)
●
If liquid is adhered, wipe it off with a soft and dry cloth.
●
Foreign objects may also adhere to the grooves on the side of a rubber seal or at
its corners. Clean with a brush.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
