Preparation
19
VQT1F52
[POWER SAVE]
(Turning off this unit automatically.)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Power save mode is activated (the camera
is automatically turned off to save the
battery life) if the camera has not been
used for the time selected on the setting.
[1MIN.], [2MIN.], [5MIN.], [10MIN.], [OFF]
• Press the shutter button halfway or turn
this unit off and on to cancel power save
mode.
• Power save mode is fixed to [2MIN.] when
economy mode is activated and [5MIN.] in
simple mode [ ].
• Power save mode is not activated in the
following cases.
– When using the AC adaptor
(DMW-AC5PP; optional)
– When connecting to a PC or a printer
– When recording or playing back motion
pictures
– During a slide show
[ECONOMY]
(Turning off the LCD monitor
automatically.)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
The brightness of the LCD monitor is
reduced, and the LCD monitor is turned off
automatically while the camera is not in
use, to save battery life when recording.
• The LCD monitor is turned off while the
flash is being charged.
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
• Power save mode is fixed to [2MIN.].
[However, power save mode is not
activated when using the AC adaptor
(DMW-AC5PP; optional).]
• The brightness of the LCD monitor is not
reduced in Power LCD mode and high
angle mode.
• Economy mode is not activated in the
following cases.
– In simple mode [ ]
– When using the AC adaptor
(DMW-AC5PP; optional)
– While a menu screen is displayed
– While the self-timer is set
– While recording motion pictures
[WORLD TIME] (P57)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Set the time in your home area and travel
destination.
[MONITOR]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Adjust the brightness of the LCD monitor in
7 steps.
[GUIDE LINE]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Set the pattern of the guide lines displayed
when taking pictures. (P34, 35)
You can also set whether or not to have the
recording information and histogram
displayed when the guide lines are
displayed.
[LEVEL 1]: The LCD monitor turns off if
the camera is not operated
for about 15 seconds in
recording mode.
[LEVEL 2]: The LCD monitor turns off if
the camera is not operated
for about 15 seconds in
recording mode or for about
5 seconds after taking a
picture.
[OFF]: Economy mode cannot be
activated.
MENU
/
SET
MENU
/
SET
[]: Travel destination area
[]: Your home area
[REC. INFO.]: [ON]/[OFF]
[HISTOGRAM]: [ON]/[OFF]
[PATTERN]: [ ]/[ ]
MENU
/
SET
MENU
/
SET
MENU
/
SET
DMC-FX100ENG.book 19 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
Need help?
General
