Preparation
20
VQT1F52
[TRAVEL DATE] (P55)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Set the departure date and the return date
of the vacation.
[SET], [OFF]
[BEEP]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
This allows you to set the beep.
[SHUTTER]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
This allows you to set the shutter sound.
[VOLUME]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
The volume of speakers can be adjusted in
7 steps from level 6 to 0.
• When you connect the camera to a TV,
the volume of the TV speakers does not
change.
[NO.RESET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Reset the file number of the next recording
to 0001.
• The folder number is updated and the file
number starts from 0001. (P93)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
(P91) the built-in memory or the card first
and then use this function to reset the file
number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.
[RESET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
The [REC] or [SETUP] menu settings are
reset to the initial settings.
• [FAVORITE] (P78) is fixed to [OFF] and
[ROTATE DISP.] (P81) is fixed to [ON].
• If the [SETUP] menu settings are reset,
the following settings are also reset.
– The birthday settings for [BABY1]/
[BABY2] (P50) and [PET] (P50) in scene
mode.
– The number of days that have passed
since the departure date in
[TRAVEL DATE]. (P55)
– The [WORLD TIME] (P57) setting.
• The folder number and the clock setting
are not changed.
[VIDEO OUT]
(Playback mode only)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Set to match the color television system in
each country.
[BEEP LEVEL]
[]: No operation sound
[]: Soft operation sound
[]: Loud operation sound
[BEEP TONE]: //
[SHUTTER VOL.]
[]: No shutter sound
[]: Soft shutter sound
[]: Loud shutter sound
[SHUTTER TONE]: //
MENU
/
SET
MENU
/
SET
1 2 3
MENU
/
SET
1 2 3
MENU
/
SET
MENU
/
SET
[NTSC]: Video output is set to NTSC
system.
[PAL]: Video output is set to PAL
system.
MENU
/
SET
MENU
/
SET
DMC-FX100ENG.book 20 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
Need help?
General
