Advanced (Playback)
- 102 -
∫ Setting the audio, duration and effect
Select [DURATION], [EFFECT] or [AUDIO] on
the screen shown in step
2 and set.
• If you set [AUDIO] to [ON] and then play
back a picture with audio, the next picture
will be displayed after the audio has finished.
• You cannot play back motion pictures and
use power save in a slide show. (However,
the setting for power save mode is fixed to
[10MIN.] while pausing a slide show or
playing back a manual slide show.)
[DURATION]
Can be set to [1SEC.],
[2SEC.], [3SEC.],
[5SEC.] or [MANUAL]
(manual playback).
• You can only select
[MANUAL] when [ ] or
[ ] has been
selected in step
1.
• Press 2/1 to display
the previous or next
picture when [MANUAL]
is selected.
[EFFECT]
A slide show effect can
be selected.
[OFF]:No effect
:
New pictures slide
across the screen.
:Current pictures
fade out and new
pictures fade in.
:New pictures
gradually fill the screen
from the centre.
:An effect is selected
at random.
• If you set [DURATION]
to [MANUAL] the
settings in [EFFECT]
are disabled.
[AUDIO]
If set to [ON], the audio
of the pictures with audio
is played back.
To Next Page
Loading...
