- 119 -
Advanced (Playback)
Press [ ] to display the [PLAY] mode menu
and select the item to set. (P100)
You can enlarge and then clip the important
part of the recorded picture.
1 Press 2/1 to select the picture and
then press 4.
• The following pictures cannot be trimmed.
– Motion pictures
– Pictures with audio
– Pictures stamped with [TEXT STAMP]
2 Enlarge or decrease the parts to be
trimmed with the zoom lever.
3 Press 3/4/2/1 to move the
position of the part to be trimmed.
4 Press the shutter button.
• The message [DELETE ORIGINAL
PICTURE?] appears.
5 Press 3/4 to select [YES] or [NO]
and then press [MENU/SET].
• The picture is overwritten when you select
[YES]. The trimmed pictures cannot be
restored when they are overwritten.
• A trimmed picture is newly created when
you select [NO].
• When the original picture is protected, you
cannot overwrite it. Select [NO] and newly
create a trimmed picture.
6 Press [MENU/SET] twice to close
the menu.
• Depending on the cut size, the picture size
of the trimmed picture may become smaller
than that of the original picture.
• The picture quality of the trimmed picture will
deteriorate.
• It may not be possible to trim pictures
recorded with other equipment.
[TRIMMING]
Enlarging a picture and trimming it
/SET
MENU
/SET
MENU
To Next Page
Loading...
Need help?
General
