- 17 -
Preparation
Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
A [MENU/SET] button
B Cursor buttons
C Mode dial
1 Press [MENU/SET].
2 Press 3/4/2/1 to select the date
and time.
A Time at the home area
B Time at the travel destination (P73)
• 2/1: Select the desired item.
• 3/4: Set the display order for the date
and time.
• : Cancel without setting the clock.
3 Press [MENU/SET] to set.
• Turn the camera off after setting the clock.
Then set the mode dial to a recording
mode to turn the camera on and check
whether or not the clock setting is correct.
OFF
ON
:
:
To Next Page
Loading...
