Advanced (Playback)
- 116 -
Press [ ] to display the [PLAY] mode menu
and select the item to set. (P100)
You can set protection for pictures you do not
want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
∫ Single setting
1 Press 2/1 to select the picture and
then press 4 to SET/CANCEL.
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P114 to 115)
• If you press [MENU/SET] while cancelling
protection, the cancelling will stop halfway.
• The protect setting may not be effective on
other equipment.
• If you want to delete protected pictures,
cancel their protection.
• Even if you protect pictures in the built-in
memory or a card, they will be deleted if the
built-in memory or the card is formatted.
• Even if you do not protect pictures on an SD
Memory Card or an SDHC Memory Card,
they cannot be deleted when the card’s
Write-Protect switch B is set to [LOCK].
• The following functions cannot be used with
protected pictures.
–[ROTATE]
– [AUDIO DUB.]
– [TITLE EDIT]
[PROTECT]
Preventing accidental erasure of
pictures
[SET]
The protect icon [ ] A
appears.
[CANCEL]
The protect icon [ ] A
disappears.
/SET
MENU
/SET
MENU
A
2
To Next Page
Loading...
