- 29 -
Basic
Basic
Taking Pictures
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
• The status indicator 3 lights when you turn
this unit on 2. (It turns off after about
1 second.)
(1: Shutter button)
1 Hold this unit gently with both
hands, keep your arms still at your
side and stand with your feet
slightly apart.
A Flash
B AF assist lamp
C When holding the camera vertically
2 Aim the AF area at the point you
want to focus on.
3 Press the shutter button halfway to
focus.
• The focus indication 2 lights green and
the AF area 1 turns from white to green.
(3: Aperture value, 4: Shutter speed)
• The focus range is 50 cm to ¶.
• The subject is not focused in the following
cases.
– The focus indication blinks (green).
– The AF area turns white to red or there
is no AF area.
– The focus sound beeps 4 times.
• If the distance is beyond the focus range,
the picture may not be properly focused
even if the focus indication lights.
4 Press the halfway pressed shutter
button fully to take a picture.
1/30F2.8
To Next Page
Loading...
