Advanced (Playback)
- 122 -
Press [ ] to display the [PLAY] mode menu
and select the item to set. (P100)
You can copy data of pictures you have shot
from the built-in memory onto a card, from a
card into the built-in memory or from a card
into the dedicated clipboard folder.
1 Press 3/4 to select the copy
destination and then press [MENU/
SET].
•:
All the picture data in the built-in memory
are copied onto the card at one time. >
step
3.
•:
One picture at a time is copied from the
card to the built-in memory. > step
2.
•
The images are copied from the card to
the dedicated clipboard folder (built-in
memory) one at a time. (Motion pictures
cannot be copied.) > Step
2.
2 Press 2/1 to select the picture and
then press 4.
(Only when selecting [ ], [ ])
3 Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
pictures are copied from the built-in
memory to a card.)
• If you press [MENU/SET] while copying
pictures from the built-in memory to the
card, the copying will stop halfway.
• Do not turn the camera off or perform any
other operations before copying is
finished. The data on the built-in memory
or the card may be damaged or lost.
4 Press [MENU/SET] several times to
close the menu.
• If you copy from the built-in memory to a
card, all the pictures are copied and then
the screen automatically returns to the
playback screen.
[COPY]
Copying the picture data
/SET
MENU
/SET
MENU
/SET
MENU
To Next Page
Loading...
