Advanced (Recording pictures)
- 52 -
Taking Pictures with the
Self-timer
1 Press 2 [].
2 Press 3/4 to select a mode.
• You can also press 2 [ ] to select.
3 Press [MENU/SET].
• You can also press the shutter button
halfway to finish.
• The menu screen disappears after about
5 seconds. At this time, the selected item
is automatically set.
4 Press the shutter button halfway to
focus and then press it fully to take
the picture.
A Press the shutter button halfway to focus.
B Press the shutter button fully to take the
picture.
• The self-timer indicator C blinks and the
shutter is activated after 10 seconds (or
2 seconds).
• If you press [MENU/SET] while the
self-timer is set, the self-timer setting is
cancelled.
• When using a tripod etc., setting the
self-timer to 2 seconds is a convenient way
to avoid the jitter caused by pressing the
shutter button.
• When you press the shutter button once
fully, the subject is automatically focused just
before recording. In dark places, the
self-timer indicator will blink and then may
turn on brightly operating as an AF assist
lamp (P87) to allow the camera to focus on
the subject.
• The self-timer is fixed to 10 seconds in
intelligent auto mode [ ] and to 2 seconds
in clipboard mode [ ] or
[SELF PORTRAIT] (P58) in scene mode.
• When you set the self-timer in burst mode,
the camera starts taking a picture 2 or
10 seconds after the shutter button is
pressed. The number of pictures taken at
one time is fixed to 3.
• The self-timer cannot be set in
[HI-SPEED BURST] and [UNDERWATER] in
scene mode.
• We recommend using a tripod when
recording with the self-timer.
A
B
To Next Page
Loading...
