- 109 -
Advanced (Playback)
Press [ ] to display the [PLAY] mode menu
and select the item to set. (P100)
You can add text (comments) to pictures.
After text has been registered, it can be
included in prints using [TEXT STAMP]
(P111). (Only alphabetic characters and
symbols can be entered.)
Press 3/4 to select [SINGLE] or
[MULTI] and then press [MENU/
SET].
∫ Single setting
1 Press 2/1 to select a picture and
then press 4.
• The title edit icon [ ] is displayed for
pictures that have already been recorded
with text in [BABY1]/[BABY2] (P61) or
[PET] (P63) name settings in scene
mode or [TITLE EDIT].
2 Press 3/4/2/1 to select text and
then press [MENU/SET] to register.
• Refer to the P110 for an example of the
text entry.
• Press [DISPLAY] to switch text between
[A] (capitals), [a] (small case) and [&/1]
(special characters and numbers).
• The cursor at the entry position can be
moved to the left with [ ], and to the
right with [ ].
• To enter a blank, move the cursor to
[SPACE], and press [MENU/SET].
• To stop editing at any time during text
entry, press [ ].
• To delete an entered character, move
the cursor to [DELETE], and press
[MENU/SET].
• A maximum of 30 characters can be
entered.
3 Press 3/4/2/1 to move the cursor
to [EXIT] and then press [MENU/
SET] to end text input.
4 Press [MENU/SET] twice to close
the menu.
[TITLE EDIT]
Adding text (comments) to pictures
/SET
MENU
/SET
MENU
/SET
MENU
To Next Page
Loading...
