- 79 -
Advanced (Recording pictures)
Press [ ] to display the [REC] mode menu
and select the item to set. (P75)
The camera will automatically set the optimal
ISO sensitivity and the shutter speed to the
movement of the subject and the surrounding
brightness.
• One of the following maximum ISO
sensitivity levels can be selected. The higher
the value set for the ISO sensitivity, the more
the jitter is reduced but the greater the
amount of picture noise.
• Jitter is avoided when taking pictures
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster.
• Noise is avoided when taking pictures
indoors of a subject with no movement by
decreasing the ISO sensitivity.
• When you press the shutter button halfway,
[] A appears. When you press the
shutter button fully, the shutter speed and
the ISO sensitivity appear for a while.
• When the flash is activated, the ISO
sensitivity is automatically increased to
maximum ISO sensitivity level.
• Refer to P50 for information about the
available flash range.
• Depending on the brightness and how fast
the subject is moving, jitter may not be
avoided.
• The camera may not be able to detect the
movement of the subject in the following
cases.
– When the moving subject is small
– When the moving subject is at the edge of
the screen
– When the subject starts moving the instant
the shutter button is pressed fully
• To avoid picture noise, we recommend
decreasing maximum ISO sensitivity level or
setting [COL.MODE] to [NATURAL]. (P88)
• You cannot use the following functions.
– [D.ZOOM]
– [SLOW SHUTTER]
[INTELLIGENT ISO]
Automatically setting the optimal
ISO sensitivity and shutter speed
Item Settings
OFF Intelligent ISO does not work.
400 The ISO sensitivity
automatically increases up to
the set value according to the
movement and brightness of
the subject.
800
1250
/SET
MENU
ISOMAX
400
ISOMAX
800
ISOMAX
1250
1/125 ISO800
1/30 ISO200
A
To Next Page
Loading...
