Connecting to other equipment
- 126 -
[Windows]
The drive appears in the [My Computer]
folder.
• If you are connecting the camera to a PC for
the first time, the required driver is installed
automatically so that the camera can be
recognised by “Windows Plug and Play”.
The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when you
connect the camera with no card inserted.
• The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera with
a card inserted.
∫ About motion picture playback on a PC
Use the software “QuickTime” in the CD-ROM
(supplied) to play back motion pictures
recorded on this camera on a PC.
• If you use “Windows 98/98SE/Me”,
download “QuickTime 6.5.2 for Windows”
from the following site, and install it.
http://www.apple.com/support/downloads/
quicktime652forwindows.html
• This software is installed as standard on a
“Macintosh OS”.
∫ Folder Composition
Folders are displayed as shown in the
following illustration.
1 Folder number
2 File number
3 JPG: Pictures
MOV: Motion pictures
MISC: DPOF print
Favourite
Category slide show
PRIVATE1:
(Built in memory
only)
Clipboard pictures
(P89)
100_PANA
101_PANA
999_PANA
DCIM
MISC
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
1
23
PRIVATE 1
MEMO0001.JPG
23
MEMO0002.JPG
≥Built-in memory
≥
Card
To Next Page
Loading...
