- 131 -
Connecting to other equipment
∫ Selecting multiple pictures and printing
them
1 Press 3.
2 Press 3/4 to select an item and
then press [MENU/SET].
¢ This only appears when [FAVORITE] is
set to [ON]. (However if none of the
pictures have [ ] displayed, you cannot
select it even if [FAVORITE] is set to
[ON].)
3 Press 3 to select [PRINT START]
and then press [MENU/SET].
• [PRINT WITH DATE] and
[NUM. OF PRINTS] are not displayed
when [DPOF PICTURE] is set.
• The [DPOF SET] is displayed when
[DPOF PICTURE] is selected. If you
selected [DPOF SET], refer to P114 and
set them.
• Press [MENU/SET] to cancel printing.
• When you select [MULTI SELECT],
[SELECT ALL] or [FAVORITE], a print
confirmation screen appears. Select
[YES] and print the pictures.
• The message [PRINTING ##
PICTURE(S) DO YOU WANT TO
PROCEED ?] appears on the print
confirmation screen if the number of prints
is more than 1000.
• The pictures recorded in clipboard mode
[ ], copy them onto a card (P91), and
then print them out.
4 Disconnect the USB connection
cable after printing.
[MULTI SELECT]
Multiple pictures are
printed at one time.
• After selecting
[MULTI SELECT],
press 2/1 to select
the pictures to print
and then press 4.
The icon [ ]
appears on the
pictures to be printed.
(Press 4 again to
cancel the setting.)
Press [MENU/SET]
after finishing the
setting.
[SELECT ALL]
Prints all the stored
pictures.
[DPOF PICTURE]
Prints the pictures set
in [DPOF] only.
[FAVORITE]¢
Prints the pictures set
as favourites only.
PictBridge
DPOF PICTURE
SELECT ALL
FAVORITE
MULTI SELECT
SELECT
CANCEL
SET
MENU
/SET
MENU
MULTI SELECT
NUM
.
OF PRINTS
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECTCANCEL SET
MENU
PRINT START
1
OFF
/SET
MENU
To Next Page
Loading...
