- 147 -
Others
3: The motion pictures cannot be played
back on a TV.
• Are you trying to play back the motion
pictures by directly inserting the card in
the card slot of the TV?
– Connect the camera to the TV with the
AV cable (supplied) and then play back
the pictures on the camera. (P134)
4: The picture is not displayed fully on the
TV.
• Set the aspect of the TV on the camera.
(P26)
5: The picture cannot be transferred
when the camera is connected to a PC.
• Is the camera connected to the PC
correctly?
• Is the camera recognised by the PC
correctly?
6: The card is not recognised by the PC.
(The built-in memory is recognised.)
• Disconnect the USB connection cable.
Connect it again while the card is inserted
in the camera.
7: The picture cannot be printed when the
camera is connected to a printer.
• Does the printer support PictBridge?
• Reset the mode to [ ]. (P129)
8: The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details, refer
to the operating instructions for the
printer.)
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
∫ Others
1: An unreadable language was selected
by mistake.
• Press [MENU/SET], select the [SETUP]
menu icon [ ] and then select the [ ]
icon to set the desired language. (P26)
2: The setting for the auto review function
is disabled.
• Are you taking pictures using auto bracket
(P54)? Is the camera in burst mode (P86)
or motion picture mode [ ] (P69),
[SELF PORTRAIT] (P58) or
[HI-SPEED BURST] (P64) in scene
mode?
Is [AUDIO REC.] set to [ON] (P82)?
– In these cases, you cannot set the auto
review function in the [SETUP] menu.
3: A red lamp sometimes turns on when
the shutter button is pressed halfway.
• In dark places, the AF assist lamp (P87)
lights red to make it easier to focus on a
subject.
4: The AF assist lamp does not turn on.
• Is [AF ASSIST LAMP] on the [REC] mode
menu set to [ON]? (P87)
• Are you taking pictures in dark places?
– The AF assist lamp does not turn on in
bright places.
• The AF assist lamp does not turn on when
[SELF PORTRAIT], [SCENERY], [NIGHT
SCENERY], [SUNSET], [FIREWORKS] or
[AERIAL PHOTO] in scene mode is
selected. (P56)
To Next Page
Loading...
