Basic
- 36 -
• The optical zoom is set to Wide (1k) when
the camera is turned on.
• If you use the zoom function after focusing
on the subject, focus on the subject again.
• The lens barrel extends or retracts according
to the zoom position. Take care not to
interrupt the motion of the lens barrel while
the zoom lever is rotated.
• In motion picture mode [ ], the zoom
magnification is fixed to the value set at the
start of recording.
• “EZ” is an abbreviation of
”Extra optical Zoom”.
• If you set a picture size that activates the
extra optical zoom, the extra optical zoom
icon [ ] is displayed on the screen when
you use the zoom function.
• The zoom will stop moving for an instant
near [W] (1k) when the extra optical zoom is
used. This is not a malfunction.
• The indicated zoom magnification is an
approximation.
• In motion picture mode [ ] and
[HIGH SENS.] or [HI-SPEED BURST] in
scene mode, the extra optical zoom does not
work.
To Next Page
Loading...
