- 103 -
Advanced (Recording pictures)
∫ About AF area selection
You can select the AF area when [ ],
[ ], [ ] or [ ] is selected.
1 Set the focus to AF or AF macro.
2 Select AF area with 1 on the joystick and
then press the centre of the joystick.
3 Move the AF area with the cursor buttons
or 3/4/2/1 on the joystick.
4 Press [MENU/SET] or press the centre of
the joystick to set.
When selecting [ ], [ ] or [ ]
You can select 1 AF area from the 11 areas.
When selecting [ ]
You can select AF areas as shown in the
following illustration by tilting the joystick
towards 3/4/2/1.
• The spot metering target can also be moved
to match the AF area when using [ ].
• The following operations will return the AF
area to the previous position.
– When the mode dial is set to intelligent
auto mode [ ]
– When the power save mode is activated
– When this unit is turned off
or
To Next Page
Loading...
