Advanced (Playback)
- 134 -
• DPOF is an abbreviation of “Digital Print
Order Format”. This feature allows you to
write print information to media and then use
the information on a DPOF-compliant
system.
• DPOF print setting is a convenient function
when printing pictures with a printer that
supports PictBridge. The date printing
setting on the printer may take priority over
the date printing setting on the camera.
Check the date printing setting on the printer
also. (P145)
• Some DPOF information set by other
equipment cannot be used. In such cases,
delete all of the DPOF information and then
set it again with this camera.
• If the file is not based on the DCF standard,
the DPOF print setting cannot be set.
• Pictures that were taken with the [QUALITY]
set to [RAW] cannot be printed using DPOF
print.
Press [ ] to display the [PLAY] mode menu
and select the item to set. (P120)
You can set protection for pictures you do not
want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
∫ Single setting
1 Press 2/1 to select the picture and
then press 4 to SET/CANCEL.
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P132 to 134)
[PROTECT]
Preventing accidental erasure of
pictures
[SET]
The protect icon [ ] A
appears.
[CANCEL]
The protect icon [ ] A
disappears.
MENU
SET
MENU
SET
A
To Next Page
Loading...
