EasyManua.ls Logo

Panasonic LUMIX DMC-FZ18

Panasonic LUMIX DMC-FZ18
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced (Recording pictures)
- 104 -
Press [ ] to display the [REC] mode menu
and select the item to set. (P92)
About the jitter/movement detection
demonstration screen
Press [DISPLAY] to display [JITTER, SUBJ.
MOVE DEMO] when the [STABILIZER]
screen is displayed. (Pictures cannot be
recorded when the [JITTER, SUBJ. MOVE
DEMO] screen appears.)
Press [DISPLAY] again to finish this mode.
A Jitter detection demonstration
B Movement detection demonstration
It is also possible to display this screen using
the quick setting (P92).
The camera automatically detects the jitter
and the movement of the subject and
displays these on the indicator.
We recommend using a bright subject with
high contrast for the subject movement
demonstration.
The jitter/movement detection demonstration
screen is an approximation.
The camera uses movement detection when
automatically setting the ISO sensitivity in
the following cases.
In intelligent auto mode [ ].
In [INDOOR PORTRAIT] in [PORTRAIT]
mode.
In [NORMAL SPORTS], [OUTDOOR
SPORTS] and [INDOOR SPORTS] in
[SPORTS] mode.
In [BABY1]/[BABY2] and [PET] in scene
mode.
When [INTELLIGENT ISO] is set
The stabilizer function may not be effective
in the following cases.
When there is a lot of jitter.
When the zoom magnification is high.
In digital zoom range.
When taking pictures while following a
moving subject.
When the shutter speed becomes slower
to take pictures indoors or in dark places.
Be careful of camera jitter when you press
the shutter button.
The setting is fixed to [OFF] in
[STARRY SKY] in scene mode.
The setting cannot be set to [OFF] in the
intelligent auto mode [ ].
In motion picture mode [ ] or [PANNING]
in scene mode, [MODE2] cannot be set.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
MENU
SET
A
B

Table of Contents

Related product manuals