Advanced (Recording pictures)
- 60 -
Taking Pictures using
Burst Mode
1 Press and hold the single or burst
mode button until
[BURST SHOOTING] appears.
2 Press 3/4 to select a mode.
• You can also press the single or burst
mode button to select.
3 Press [MENU/SET].
• You can also press the shutter button
halfway or press the centre of the
joystick to finish.
• The menu screen disappears after about
5 seconds. At this time, the selected item
is automatically set.
4 Take a picture.
• Hold down the shutter button fully to
activate the burst mode.
∫ Number of pictures recorded in burst
mode
¢ The burst speed is constant regardless of
the transfer speed of the card.
• The number of pictures indicated is when
the shutter speed is faster than 1/60 and the
flash is not activated.
• The burst speed (pictures/second) may
become slower depending on the recording
environment such as in dark places, if the
ISO sensitivity is high etc.
• If you take pictures in burst mode with the
built-in memory, it will take time to write the
picture data.
or
Burst speed
(pictures/
second)
Number of recordable pic-
tures (pictures)
3
¢
max. 4 max. 7
approx. 2
Depends on the
remaining capacity of the
built-in memory/card.
To Next Page
Loading...
