- 57 -
Advanced (Recording pictures)
Compensating the
Exposure
Use this function when you cannot achieve
appropriate exposure due to the difference in
brightness between the subject and the
background. Look at the following examples.
Compensate the exposure towards positive.
Compensate the exposure towards negative.
∫ Operation with the joystick
Select [ ] with 2 on the joystick
and then compensate the exposure
with 3/4.
• You can compensate from [j2EV] to
[i2 EV] in steps of [1/3 EV].
• Select [ ] only to return to the original
exposure (0 EV).
∫ Operation with the cursor buttons
1 Press 3 [ ] until [EXPOSURE]
appears, compensate the exposure
with 2/1.
• You can compensate from [j2EV] to
[i2 EV] in steps of [1/3 EV].
• Select [0 EV] to return to the original
exposure.
2 Press [MENU/SET] to finish.
• You can also press the shutter button
halfway to finish.
Under exposed
Properly
exposed
Overexposed
To Next Page
Loading...
