- 115 -
Advanced (Playback)
Using the Playback
Zoom
1 Rotate the zoom lever towards [ ]
[T] to enlarge the picture.
•:1k>2k>4k>8k>16k
• When you rotate the zoom lever towards
[ ] [W] after enlarging the picture, the
magnification becomes lower. When you
rotate the zoom lever towards [ ] [T], the
magnification becomes higher.
• When you change the magnification, the
zoom position indication A appears for
about 1 second so that you can check the
position of the enlarged section.
2 Press 3/4/2/1 to move the
position.
• When you move the position to be
displayed, the zoom position indication
appears for about 1 second.
∫ To stop using the playback zoom
Rotate the zoom lever towards [ ] [W] or
press [MENU/SET].
∫ To delete a picture during the playback
zoom
1 Press [ ].
2 Press 3 to select [YES].
3 Press [MENU/SET].
∫ Selecting pictures while they are
enlarged (during playback zoom)
Press 2/1 on the joystick after performing
step
1 or 2.
• You can also delete the recording
information etc. on the LCD monitor/
Viewfinder during playback zoom by
pressing [DISPLAY].
• The more a picture is enlarged, the more its
quality deteriorates.
• If you want to save the enlarged picture, use
the trimming function. (P137)
• The playback zoom may not operate if
pictures have been recorded with other
equipment.
• The zoom position returns to the centre in
the following pictures.
– Images with different aspect ratios
– Images with different numbers of recorded
pixels
– Images with a different rotation direction
(when [ROTATE DISP.] is set to [ON])
W T
A
To Next Page
Loading...
