Preparation
- 10 -
Attaching the Lens Cap/
Strap
∫ Lens Cap (supplied)
1 Pass the string through the hole on
the lens cap.
2 Pass the same string through the
hole on the camera.
3 Attach the lens cap.
• When you turn the camera off, carry the
camera or play back the pictures, attach the
lens cap to protect the surface of the lens.
• Detach the lens cap before turning on the
camera in the recording mode.
• Be careful not to lose the lens cap.
∫ Strap (supplied)
1 Pass the strap through the hole at
the strap eyelet.
2 Pass the strap through the stopper
and fasten the strap.
A: Pull the strap 2 cm or more.
• Attach the strap to the other side of the
camera being careful not to twist it.
• Check that the strap is firmly attached to the
camera.
• Attach the strap so that the “L
UMIX” LOGO is
on the outside.
• We recommend attaching the strap when
using the camera to prevent it from dropping.
To Next Page
Loading...
